SH/T 0798-2007 阴离子乳化沥青
作者:标准资料网 时间:2024-05-21 19:28:34 浏览:8766
来源:标准资料网
基本信息
标准名称: | 阴离子乳化沥青 |
英文名称: | Standard specification for anionic emulsified asphalt |
中标分类: |
石油 >>
石油产品 >>
石油沥青 |
ICS分类: |
石油及相关技术 >>
石蜡、沥青材料和其他石油产品:
|
发布部门: | 中华人民共和国国家发展和改革委员会 |
发布日期: | 2007-08-01 |
实施日期: | 2008-01-01 |
首发日期: | |
作废日期: | |
提出单位: | 中国石油化工集团公司 |
归口单位: | 石油大学(华东)重质油研究所 |
起草单位: | 石油大学(华东)重质油研究所 |
起草人: | 孔宪明、张玉贞、刘国祥 |
出版社: | 中国石化出版社 |
出版日期: | 2008-03-01 |
页数: | 7页 |
书号: | 1580229·141 |
适用范围
本标准规定了7种路用阴离子乳化沥青的分类、技术要求、检验方法、检验规则、标志和包装、贮存。
本标准适用于以沥青、水和阴离子乳化剂等为原料制成的乳化沥青。
本标准未涉及有关使用的安全规定。标准使用者有责任在使用前制定合适的安全应用规范。
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类: 石油 石油产品 石油沥青 石油及相关技术 石蜡 沥青材料和其他石油产品:
基本信息
标准名称: | 硅质耐火材料化学分析方法 重量法测定灼烧减量 |
英文名称: | Silica refractories--Determination of loss content on ignition--Gravimetric method |
中标分类: |
建材 >>
耐火材料 >>
耐火材料综合 |
ICS分类: |
玻璃和陶瓷工业 >>
耐火材料
|
替代情况: | 被GB/T 6901.1-2004代替 |
发布日期: | 1986-09-01 |
实施日期: | 1987-09-01 |
首发日期: | 1986-09-16 |
作废日期: | 2004-07-01 |
归口单位: | 中国钢铁工业协会 |
起草单位: | 洛阳耐火材料所 |
出版日期: | 1900-01-01 |
页数: | 0 |
适用范围
没有内容
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类: 建材 耐火材料 耐火材料综合 玻璃和陶瓷工业 耐火材料
Product Code:SAE J443
Title:Procedures for Using Standard Shot Peening Almen Strip
Issuing Committee:Surface Enhancement Committee
Scope: This SAE Recommended Practice provides uniform procedures for using the standard shot peening test strips reported in SAE J442. Standard test strips are used to establish saturation, determine intensity, monitor repeatability of the shot peening machine operations, and can be used to predict a desired result on a part. It is recommended that the standard test strip A be used for intensities that produce arc heights of 0.10 mm A (0.004 inch A) to 0.60 mm A (0.024 inch A). For intensities below 0.10 mm A (0.004 inch A), the standard N strip is recommended, and for intensities above 0.60 mm A (0.024 inch A), the standard C strip is recommended.The process of shot peening, in common with many other processes, cannot at present be adequately controlled by nondestructive inspection of the peened parts, therefore, it is necessary to control the process itself to achieve consistent, reliable results.
Rationale: This SAE Recommended Practice provides uniform procedures for using the standard shot peening test strips reported in SAE J442. Standard test strips are used to establish saturation, determine intensity, monitor repeatability of the shot peening machine operations, and can be used to predict a desired result on a part. It is recommended that the standard test strip A be used for intensities that produce arc heights of 0.10 mm A (0.004 inch A) to 0.60 mm A (0.024 inch A). For intensities below 0.10 mm A (0.004 inch A), the standard N strip is recommended, and for intensities above 0.60 mm A (0.024 inch A), the standard C strip is recommended.The process of shot peening, in common with many other processes, cannot at present be adequately controlled by nondestructive inspection of the peened parts, therefore, it is necessary to control the process itself to achieve consistent, reliable results.